Letter Sizes (Uncoated)

  • Solid carbide reamers are used to straighten drilled holes to a more exact tolerance.
  • Best to use a reamer diameter .010-.020 larger than pre-drilled hole diameter.
  • Can be coated in TiN, TiCN, and ALTiN, adding .0002-.0004 to reamer diameter.
  • Reamer tolerances are +.0/-.0004…and available in Metric Sizes also!
Table
Part# Reamer Dia Flute Length O.a. Length Decimal Equivalent Quantity List Price Total
Price $
605-2340 A 1 3 0.234 25.94
605-2380 B 1 3 0.238 25.86
605-2420 C 1 3 0.242 25.70
605-2460 D 1 3 0.246 25.50
605-2500 E 1 3 0.25 23.32
605-2570 F 1-1/8 3-1/4 0.257 31.38
605-2610 G 1-1/8 3-1/4 0.261 31.30
605-2660 H 1-1/8 3-1/4 0.266 31.26
605-2720 I 1-1/8 3-1/4 0.272 31.22
605-2770 J 1-1/8 3-1/4 0.277 31.16
605-2810 K 1-1/8 3-1/4 0.281 31.10
605-2900 L 1-1/8 3-1/4 0.29 30.80
605-2950 M 1-1/8 3-1/4 0.295 30.84
605-3020 N 1-1/4 3-1/4 0.302 30.86
605-3160 O 1-1/4 3-1/4 0.316 34.90
605-3230 P 1-1/4 3-1/2 0.323 35.00
605-3320 Q 1-1/4 3-1/2 0.332 35.10
605-3390 R 1-1/4 3-1/2 0.339 35.32
605-3480 S 1-1/4 3-1/2 0.348 35.14
605-3580 T 1-1/4 3-1/2 0.358 38.20
605-3680 U 1-3/8 4 0.368 38.24
605-3770 V 1-3/8 3-1/2 0.377 48.08
605-3860 W 1-3/8 3-1/2 0.386 48.12
605-3970 X 1-3/8 3-1/2 0.397 55.60
605-4040 Y 1-1/2 3-1/2 0.404 57.00
605-4130 Z 1-1/2 3-1/2 0.413 58.60
TOTAL PRICE
$0.00